- On-Road Vehicles
- Off-Road Vehicles
- Ready To Ship Vehicles
- Most Popular Parts & Accessories
- Search All Parts & Accessories
- Tools & Testing
- Covers
- Accessories
-
Parts
- Bearings
- Bolts & Washers
- Brackets & Mounts
- Cables & Levers
- Clutches, Parts & Covers
- CV Axles
- Drive Belts
- Drive Shafts & Parts
- Electrical
- Engine Parts
- Fuel Parts
- Fuel Pumps
- Full Exhaust & Parts
- Gaskets, O-Rings & Kits
- Intake Parts
- Spark Plug Covers
- Spark Plugs
- Steering Racks & Parts
- Suspension, Kits & Springs
- Filters & Fluids
- Brakes
HANDLEBAR CB400F REPLICA CHROME
HANDLEBAR CB400F REPLICA CHROME
HANDLEBAR CB400F REPLICA CHROME
|
$37.59
|
Model # 829055
MPN # 23-93142
MPN # 23-93142
If OEM number is listed, bar is an exact OE copy; check OEM number for exact fitment
Made from carbon steel
Available in bright chrome
Verify measurements before ordering
Included Items:
(1) 7/8 in. chrome carbon steel handlebar
Width: 27 1/2 in.
Rise: 2 1/4 in.
Pullback: 3 1/2 in.
Center Width: 5 in.
End Rise: 3 1/2 in.
7/8 in. Diameter Clamping Width: 5 in.
Inside Width of Knurling/Outside:3 1/4 in./4 1/2 in.
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: No
Three Notches for 08-up H-D with Electronic Throttle: No
Center Width 4 5/8 in.
Clamping Diameter - Handlebars 7/8 in.
Color Chrome
Description Pre-Drilled
Description Knurled
Diameter - Handlebar 7/8 in.
End Rise 3 1/2 in.
Overall Width 27 1/3 in.
Pullback/Sweep - Handlebars 4 in.
Rise 1 3/4 in.
Type OEM Replacement Bend
Units Each
Weight 1.65 lbs
Alternate/OEM Part Number(s): 06012586
Made from carbon steel
Available in bright chrome
Verify measurements before ordering
Included Items:
(1) 7/8 in. chrome carbon steel handlebar
Width: 27 1/2 in.
Rise: 2 1/4 in.
Pullback: 3 1/2 in.
Center Width: 5 in.
End Rise: 3 1/2 in.
7/8 in. Diameter Clamping Width: 5 in.
Inside Width of Knurling/Outside:3 1/4 in./4 1/2 in.
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: No
Three Notches for 08-up H-D with Electronic Throttle: No
Center Width 4 5/8 in.
Clamping Diameter - Handlebars 7/8 in.
Color Chrome
Description Pre-Drilled
Description Knurled
Diameter - Handlebar 7/8 in.
End Rise 3 1/2 in.
Overall Width 27 1/3 in.
Pullback/Sweep - Handlebars 4 in.
Rise 1 3/4 in.
Type OEM Replacement Bend
Units Each
Weight 1.65 lbs
Alternate/OEM Part Number(s): 06012586
Reviews about HANDLEBAR CB400F REPLICA CHROME
